Midi sharp notes USB Front Panel
Cvsequencer | Posted on Tue 07 Jul 2020, 07:45 PM I use an Arturia Keystep to control the EssenceFM, if I connect it to the USB connector on the front panel, there are constantly notes that remain sustain and I have to press the Panic button every time, I always turn it on with the Keystep connected as you describe. On the other hand, if I connect it through the rear Midi Din connector, it works perfectly.I suppose you can solve it in next updates Best from Bcn and MY congratulations for this amazing Synth...Iā m in love! |
KODAMO | Posted on Wed 08 Jul 2020, 01:13 AM HiThank you for your message! Which firmware version do you have ? (you can check by going into Global > System) |
| Cvsequencer | Posted on Wed 08 Jul 2020, 10:25 AM The last, 1.3 |
| KODAMO | Posted on Wed 08 Jul 2020, 11:21 AM The last one is version 2 you can find it on this website by going into Support, then click on Firmwaresand follow the instructions. That version improves USB-Host compatibility, I'm 100% sure that will fix your problems ;) |
| Cvsequencer | Posted on Fri 10 Jul 2020, 10:13 PM Downloaded and installed OS 2 without problems. The problem persist. |
| KODAMO | Posted on Sat 11 Jul 2020, 11:27 AM We're also using a Keystep connected via USB without any problems so this is weird.Have you tried a minimal use case: only the Keystep connected and the audio output, only playing a single patch or voice without doing any manipulation on screen. Also ensure your Keystep has the latest firmware: https://www.arturia.com/products/keystep/resources Arturia fixed a USB problem that impacted some devices including ours: USB packets now properly sent, solves the connection to a USB host such as the FH-2 |
| Cvsequencer | Posted on Thu 16 Jul 2020, 06:26 PM Yeah!I updated Keystep last Os and now works perfect. Thanks a lot. Best, Jordi |
Reply
